Service & Operation Manuals

MAN B&W DIESEL - K80MC-C6 Project Guide - Camshaft Controlled Two Stroke Engines.

MAN B&W DIESEL - L60MC-C7 Project Guide - Camshaft Controlled Two Stroke Engines.

MAN B&W DIESEL - S26MC6TII Project Guide - Camshaft Controlled Two Stroke Engines.

MAN B&W DIESEL - L60MC-C8 Project Guide - Camshaft Controlled Two Stroke Engines

This is a good technical document sharing the updates on the whole recent service experience on the two-stroke marine engines, with both mechanically and electrically controlled versions covered.

The low-speed engine operation is the critical technological topics of today; some update relation to subject engines is also there in the content of subject review, together with the issues with the combustion chambers and fuel injection.

In general, this book gives the updates on all technical achievements directly relating to the diesels and challenges for Dot 2 version is also touched on. An informative reference for the marine engineers who want to be updated with all latest happenings in marine engineering.

This valuable technical paper is basically intended to provide the shipping industry with the critically important findings directly relating to the service experience of the small bore engines produced by MAN and clearly describe how the specialists have identified and rectified numerous associated technical problems.

An excellent technical compendium for the engineers. Among the topics addressed in this document there are cylinder accidents and technical procedure to follow when adjusting the valves, temperature of the exhaust gases, cavitation, fluctuation of the pressures in the fuel oil system, exhaust gas sensors, cracked pistons and connecting rods, broken gear wheels, groove wear on liners and rings, HFO service experience and prolonged intervals between periodical overhauls, leaking oil, new rollers on the valve cams etc.

Information booklet by MaK/Caterpillar dedicated to the VM 32C Low Emission Engine.

MaK CAT M601-M601C document. Contents - Engine data and operating data; Cylinder head - instructions for tightening with hydraulic jacks; Rocket arm bracket - inlet and exhaust valve rocket; Valve clearance and guide; Starting and fuel injection valves; Exhaust gas manifold and exhaust valve; Inlet valve seat ring; Valve stem; Piston; Liners; Connecting rod; Main bearing; Counterweight; Gear drive; Governor drive; Camshaft; Fuel injection pumps; Flange shaft, flywheel , turbocharger and change air cooler mounting; Connecting screws; Tie rod; Firing sequences; Valve timings; Sizes and weights.