 This set contains the technical documentation related to the several series of the multimeters, tachospeed meters, voltmeters and wattmeters produced by Autonics. It will of course be useful to anyone involved in purchase, use and repair of such equipment since in provides readers with proper instructions developed by the manufacturer.
Among the products addressed in this set there are digital panel meters of various sizes, small multi panel meters, loop powered digital scaling meters, digital graphic panel meters for mosaic panel, etc. It also includes some software developed and released by Autonics.
 This is the officially released publication with the content prepared by the specialists of one of the world leading companies, MAN B&W, to provide necessary technical information on their products. This information will be of utmost importance and practical necessity to all those involved in selection, purchasing, day-to-day operation, routing maintenance and repair of the diesel engines produced by MAN B&W.
The book opens with the chapter about the two-stroke propulsion engines and propulsion systems, followed by the detailed background on the four-stroke propulsion engines and marine generators, made by MAN. The S.E.M.T. Pielstick four-stroke marine propulsion diesel engines are dealt with in a separate section…
All above is just a portion of the info contained in this book. It also addresses the Tiers II and III of the program as well as the engine type designation, selection of the turbochargers and CEAS, SFOC, standing for the specific fuel oil consumption, turbocharging systems, optimization possibilities, GHG emissions and their control, and so many other topics.
 The official operating instructions for the GCM34-type diesel engines produced by CAT. This technical book is starting with some general info on the engine and introduction to its safety features, gas regulating unit and brief yet thorough overview of the electrical system, etc.
The main content of the publication provides required information relating to the initial operating of the engine, operational supervision, running-it and fault tracing.
Particular attention has been paid by the compilers of the Instructions to the installation of the engine, regulations and care, emergency operation of this engine and a wealth of other relevant data and information.
 MAN diesel engines are developed to the state of the art and built using the latest production technology. This results in significant properties such as Economical operation owing to low fuel and lubricating oil consumption, low weight, limited maintenance overhead and spare part requirements and a long service life, future-oriented environmental compatibility, quick load pickup, compact design.
However, trouble-free operation and high performance can be achieved only if the specified maintenance intervals are observed and the fuels, lubricants and coolants approved by MAN are used. Please observe guidelines for the protection of the environment when handling fuels, lubricants and coolants.
 The list of topics addressed within this official SKF document include the virtual elimination of damage effects from the stray electric currents together with the associated bearing damage plus the cost-effective solutions, recommended range and INSOCOAT bearing designs, important technical features and benefits, dimensions of the bearings, fits and tolerances, internal clearances and cages, various electrical properties, components design, hybrid bearings...
When the bearings are used to provide a path for the strayed current in the motors to the ground, it can get damaged. Among the top causes of the electric stray currents we shall note the asymmetry in the magnetic circuits of the motors, fast switching PWM frequency converters in the modern VFDs and unshielded electric power cables...
 The recommended official User Manual for the Isolated Converters of the CN-6000 series produced by Autonics. The layout of this document is quite similar to the one that was applied by the author in the other Autonics publications. This informative booklet opens with the description of the important technical features of the products - the multi-output, improved visibility, display of the input type and various outputs, different functions plus built-in supply of power.
The paper provides readers with the information to be used when ordering, dimensions, default factory settings, description of parts, factory default settings, technical specifications plus connections, input type selection switch, program mode, functions, major products, caution for using, monitoring mode etc.
 Here is a truly huge collection of technical documents related to the programmable controllers and related equipment produced by Mitsubishi Electric Company. CC-Link IE Field Network - CC-Link Bridge Module User's Manual - A1SD75P1-S3/P2-S3/P3-S3/AD75P1-S3/P3-Sa/P3-S3 Positioning Modules - MELSEC A/Q Series PLC - Computer Link Modules - Ethernet Interface Modules - Profibus DP Slave Module - Input/Output Modules - C Controller Modules - PLC Renewal Tool Conversion Adapters - FX-1HC PLC - FX-1GM Position Control Units - Special Function Blocks - Analog Output Expansion Boards - Simple Motion Modules - Data Link Systems - Loop Control Modules - Programming Manuals - Safety Controllers etc. In total more than four hundred useful technical documents!
 This pack consists of two documents. The first is the User's Manual for the Electronic Multi-Measuring Instruments of ME96NSR and ME96NSR-MB produced by Mitsubishi Electrics. It contains the necessary technical information on the features of this equipment, display and key functions, modes, set-up, output adjustment, testing, operation, installation, specification etc. The second book is the Programming Manual, containing general description, technical specifications, configuration conditions of CC-Link system, parameter settings, communication between the master station and meter, remote input/output and remote register, special terms, abbreviations, program example and test function mode.
|