Service & Operation Manuals

These two files provide all information required to be possessed by the personnel operating and performing maintenance of the NMF DK II cranes. The first document presents the instruction manual, while the second file contains fifty pages of electrical drawings.

This crane instruction manual opens with the general information and description of these cranes, basic safety moments and requirements to the personnel, pre-start inspections, emergency shutdown arrangements, monitoring of crane operation, troubleshooting, periodic maintenance and repair works, functional description of the hydraulic system, emergency hoisting of brakes, illustrations and spares etc.

This manual was developed by the manufacturer to provide a technical overview and clear description of the system principles including the operation instructions for the ICVS, standing for the Integrated Vessel Control System. The NAVIS IVCS 2000 is a Windows NT based dynamic positioning system. PLC input/output modules and serial ports for data input/output.

Apart from the general introduction to the system, the chapters of this publication are providing the users with the info about the operator interface, control modes and functions, system messages, display views, operational procedures, alarm message list, i.e. all information required to deal with the system.

The file contains various information necessary for proper adjustment of subject governor system. Its content was intentionally released by NABCO Ltd some years ago to be practical use for the crew members dealing with the everyday operation and routine maintenance of this machinery piece. The subject maintenance manual mainly refers to the normal standard version of the shipboard deck cranes manufactured by MacGregor.

There may appear some minor differences between individual cranes of the same type, but the general orientation concerning the the hydraulic system arrangement will of course remain the same in all cases so this manual will remain actual and valid in most cases.

This is a specifically compiled document pack intended to cover two Mitsubishi cranes including their spare parts plus tools list. The document also includes the official instruction manual and relevant reference drawings together with the record of inspection and recommended oil table, and after service net.

The above mentioned instruction manual, in turn, covers such important aspects as principal particulars and cranes' working condition, their construction and main materials, safety devices and associated equipments, shop testing and estimating the scope, relevant technical drawings and documents that shall to be forwarded, general information, and reservation of design change, Warranty.

The system utilizes low power solid state microwave oscillators operating in the 9 GHz band, providing a max range of 30000 m with line of sight. The minimum range is as low as 10 metres. It comprises two identical, user-configurable stations. One station is configured as FIX station, to be set up on a known, fixed location; the other station is configured as MOBILE (MOB) station and is installed on the ship of which the position is to be fixed.

Each station consists of an ABS, standing for the Artemis Basic Unit, on top of which a radar-like tracking antenna is mounted, and either a BOP, i.e. Basic Operating Panel or an EOP, i.e. Extended Operating Panel. The BOP is a hand-held size unit and is intended for use with the FIX station. It needs only to be connected to the FIX station's ABU to enter specific station set-up data (e.g., reference azimuth). Once the station is set up it can be disconnected. The EOP is intended for use with the MOBILE station. Functionally it is identical to the BOP, but it facilitates connection of a variety of peripheral equipment. The ABU design reflects the use of a microprocessor to make a large number of powerful features available to the user, yet making the system very friendly to operate.

Among the features are: full remote control and monitoring of the counter station (once operational), position data (including heading) available at both stations, selectable microwave frequency pairs and an auxiliary full duplex data channel.

Here is a huge collection of technical documentation provided by Mitsubishi Electric for their frequency inverters - it consists of more than a hundred files, including the instruction manuals, installation guidelines, reference manuals and technical manuals, instruction manuals etc. There are so many products covered with this set of documents - e.g. CR750-D/CR751-D/CRnD-700 series controllers, FR-A500/F500/E500 series transistorized inverters, RFI filter units, FR-A5AP control/pulse train unit, FR-A7AY/NC (and other series) inverters...

The installation guide also included in the set, offers users the necessary technical information on the control of EMC (electromagnetic capability) when using the filters and inverters - the EMC Directive and it's general requirement are also there; in addition to that, EMC control measures are explained in detail, together with the names and specifications of control components. An absolutely must-have collection for everyone involved in purchase, installation, operation, maintenance/repair of the electrical equipment containing such frequency inverters.

A very useful pack of the official documentation related to the Micro Motion Fork Viscosity Meters released by the manufacturer. It consists of four files - Product Data Sheet for the High performance multi-variable viscosity meters, Installation and configuration manual for the micro Motion 7826/7828 insertion liquid density meters covering both long and short stem versions, FVM configuration and use manual, and the installation manual for the Micro Motion fork viscosity meters, direct insertion. An absolute must-have document for people involved in the operation/maintenance of the equipment.

The present pack of documentation contains the System Description and User Manual for the MCC 2200 Monitoring & Control System manufactured by SAM Electronics. The first paper of two making this set, is describing the main features of the subject system, configuration types, different system components, and various real application examples.

The User Manual, in turn, is providing the layout plus operating instructions for the SOD 2200 system operating display. The MCS 2200, standing for the "monitoring and control system", combines the long time technical experience and technologies proven effective, with the newly introduced features.