Service and Operational Manuals — Other Machinery & Equipment

These officially released Guidelines have been developed for the JO tankers and material presented therein is to be considered an accepted procedures for tank cleaning to water white standards. The methods of cleaning contained in this manual are after the mandatory tank pre-wash, as applicable.

Apart from the introductory section, this document addresses the miscellaneous aggressive cargoes in cargo tanks with epoxy coating, absorption/desorption of epoxy coating after such cargoes, tank cleaning procedures, cleaning tanks after vegetable or animal oil cargo, some special procedures etc.

A very good and useful informational booklet prepared and released by SKF Group, one of the world leaders in the industry. The content of the document was worked out to tell the readers what the INSOCOAT are and explain the customer value, describe all their technical benefits, and provide general technical information on the coating process, namely application of the plasma spraying, sources of electrical current, lubrication matters, electric current effects and electric behavior of INSOCOAT rolling bearings, impedance and capacitance, and description of the other SKF products. An excellent source of technical information about the INSOCOAT bearings.

The document pack for OSV - 360 SAI incinerator includes following data: drawing list; general information; table of control and safety; flow chart of incinerator; flow sheet; incinerator unit - drawings; list of spares and tools; operation; troubleshooting; maintenance; waste oil burner; oil flow sheet; waste oil pump; electro-pump; thermo controller; pressure switch for fan pressure.

The amount of the information presented in these volumes with the content specifically designed for the operation and maintenance teams makes them practically useful and must-have one to be possessed on any facility with these incinerators installed.

These instructions are applicable to the S-series of DESMI pumps. Subject pumps are used for pumping different liquids (both clean and polluted) having the temperatures of 0-80 degrees. Brief contents of the document - Product description and delivery; Installation, Technical data and description; Storage and transport; Dismantling and assembling; Frost protection; Start-up; System balancing; Maintenance and periodical inspection; Repairs and ordering spares; Operating data; Drawings and spares list; Dimensional sketch. In short, this document contains literally all information the personnel operating these pumps shall be aware of.

This is the set of supporting documents officially published ed by DECKMA, the world recognized supplier of the OIW monitors/systems, consisting of Product Information book showing the company profile and providing the technical information for the bilge alarm monitors of OMD-21/2005 types, and oil monitors of OMD-12/15/17 types, pictures of their installations, data on the oil, solids and turbidity monitor OMD-7 MK II, it's specification, measuring principle and installation details, some novel concepts of oil-in-water monitoring, plus application questionnaire. Other four documents included into this pack are the instruction manuals for the OIW type OMD-11 and 15 ppm bilge alarm types OMD-12/21/2005.

The maintenance information provided with the intention to assist the owners and operators together with the service personnel. Brief content of the manual as below: Safety Precautions; CF-II M32 and M32A Unit Comparison; Service Guide; Unit Description; Operating Instructions; Electrical Maintenance; Refrigeration Maintenance; Refrigeration Service Operations; Structural Maintenance; Mechanical Diagnosis; Refrigeration Diagnosis; Refrigeration Diagram; Wiring Diagram; Wiring Schematic; Wiring Schematics with Circuit Tracing - literally everything what may be required.

This set of documentation, aimed to be of some practical assistance for the ship crew members directly involved in day-to-day operation, routine maintenance, periodical testing and also repair works of the SSHS3024-T1 cargo deck cranes, consists of five separate files representing the instruction manuals for machinery parts, hydraulic parts, and electric parts, spare parts and tools list, and finally test result.

This operation and maintenance manual was specifically compiled by INP Heavy Industries specialists and it is a really must-have book for all personnel of the ships having such cranes installed as it will be of great technical help.

Balmoral Marine are very pleased to release the present updated version of the Marine Equipment Handbook. Inside this comprehensive guide book the user will find everything he or she is willing to know about different marine and all associated equipment, anchoring and mooring equipment.

There are also basic conversion tables provided in this publication. You will definitely find all technical info you're looking for in this book - anchors, chasers and grapnels, chains and fittings, wire ropes and fittings, synthetic ropes, spooling machines, buoys, various lifting equipment, fenders, mooring systems, load testing, chain inspection, service and supply info requirements.