 The present manual was officially released by the world famous TTS Company to be used as a ready reference source when dealing with the technical maintenance of the shipboard hatch covers. It will give all necessary information about the installation of the subject equipment, routing maintenance and care, including ordering the spares and their subsequent installation.
Due to the huge dimensions and complicated design of the hatch covers, the personnel engaged in their maintenance, shall have sound knowledge and experience. The crew members should therefore ensure that the recommendations of this guidebook are followed at all times. The whole book is arranged in twelve sections, starting with the intro and warnings, followed with the specification of the equipment and maneuvering instructions.
Then, there are sections of the troubleshooting and emergencies, auxiliary operation, servicing and spares, and certification. There are also four sections devoted to the drawings, including the steelwork and fittings, hydraulic system, electric part and pneumatics. Although written for the TTS hatch covers, the content can be easily applied to any other covers, since the arrangement does not differ too much.
 This official AALBORG publication starts with the description of the system concept covering the technical data and boiler plant flow diagrams, followed by the information related to the burner and accessories, including drawings and associated data sheets, plus operational and maintenance instructions.
The next section of the paper addresses the electrical equipment, such as the alarm panel, sequence control, safeguard, again supplemented with the data tables and drawings. Next one is dedicated to the system accessories including feed water system/pumps, steam dump and salinity alarm equipment. The closing section provides the info on the burner/control panel spare parts.
 The present manual has been developed by YORK Marine ApS specialists to describe the whole functionality and control of the "Standard ARP" plant. It is arranged in three major parts dedicated to the interlocks and shutdowns, display images and functionality, and function/control description.
The main content starts with the introduction where the technical description of the system, plant design and control components are provides, followed by the chapters addressing the picture hierarchy, alarm list, PI regulator function, word list, and additional functions. The document revision record has also been provided for reference.
 The full set of technical documentation pertaining to the AALBORG Inert Gas System, Mission OL Boiler, and AV-6N Economizer. The first part, for Mission OL Boiler, contains following - technical data, operation and maintenance instructions, flow diagrams, safety valves, technical description, water level gauges, feed water system, set of drawings, oil flow meter and regulating valve, data sheets, differential transmitter, ingition burner pump, combustion air pump, drawings and operating instruction and data sheets for burner, operating principles for control system, smoke density monitor, performance curves, mission control system, commissioning and service, burner sequence diagram, operation of the panels, flame safeguard, monitoring and control system, set point diagrams, menu structure for the control system, spare parts for boiler, burner, and control system.
The second part, for Inert Gas System, includes chapters covering general description of the subject system, operation, alarm and safety devices, parts list, piping and operation diagram, schematic control diagram, operating instruction, operation flow chart, operation guidance and emergency procedure, scrubber, deck water seal, pressure valve breaker, action on faults during operation, maintenance and periodical checks, inert gas system fault, recorder SR-1000, oxygen analyzer GB-II, positioner YT-1000, pressure transmitter EJA-110, pressure controller UT-420, pressure switches JM-21, RT113 and RT116, temperature indicator UM-330, flow switch BQS, level switches S01 and FR29Z, digital indicator UT-150.
 Here is the instruction plus operational manual released by Fuji Electric for their X Model microcontrollers. It includes chapters that are covering the installation of the microcontrollers, notes on wiring and proper usage, specification and troubleshooting.
The installation chapter provides all necessary guidance and maintenance precautions to be taken into account, together with the caution on installation of the microcontrollers and precautions in wiring connection plus the requirements for the key operation and operation in case of abnormalities. Model configuration, dimensions, parts and all other important information have also been covered.
 Complete package of documents for the MAXI 50SL-1 waste oil incinerator. It includes final drawings for the above noted equipment, general specification, technical data for the incinerator and its components, loose parts for waste oil tank, and spare parts, list of valves and list of control, safety and automation.
The publication also provides readers with the process diagram for the incinerator, properties of the exhaust gas, piping diagrams, drawings of the expansion joints, main and alarm current, primary temperature control, alarm circuit, alarm and motor control, incinerator control and primary burner control, sludge alarm circuit and pilot lamps, external alarm and wealth of other technical information, data and drawings.
 The present Operating and Maintenance Instructions contain following information that will be necessary for the people dealing with the subject equipment - general technical data and important safety issues to consider, transportation matters, description of the pump, installation and mounting, start-up and shutdown, maintenance and repair, operating faults, causes and remedial action, associated documentation.
These instructions are containing the basic safety precautions relating to the installation and subsequent operation of the pumps plus their routine maintenance; this is the reason why we would definitely consider is essential for all crew members to carefully check the whole content of this document prior to the installation and starting.
 The present package contains six separate documents all referring to the TYCO products. The documents specifically selected to make this technical archive contains following papers: T1000 Marine Controller User Manual and Datasheet, Data and Specifications for the Autopulse IQ-318 Agent Releasing Control Panel and same set of documents for the Autopulse IQ-636X and IQ-636-2 Intelligent Addressable Fire Alarm Systems, supplemented with the Engineering Specifications for the Inergen Clean Agent Fire Suppression System (with Autopulse Control System). Will be of some use for crew members commonly dealing with the fire safety of the vessels.
|