Service & Operation Manuals

The engineer's guide for the CyScan PRS. The document opens with the instructions on removing/fitting the key components of the system, describing the stages of assembly and disassembly and providing an overview of the components. The next chapter deals with the engineer level access to the system including the ways to start, setting the ports, scanning the engineering functions etc.

The last chapter of the document provides users with the technical notes covering the connector pin-outs, message types and bits definition. Everything the engineer of the CyScan needs. Check the guides for operators and installers as well.

Conning 3500 serves as main input and visualisation device for any SMC configuration, such as NavPilot 3500 or DPT 3500. It provides the operator with valuable primary navigation information grouped in a set of functional or 'Conning' mimics. Each mimic is designed for a specific operating condition. It is built from a collection of components from Imtech's extensive SMC library, and may be completed with any ship specific special functionality.

In addition to the visually presented navigation information, the system may be configured to generate acoustic support such as alarm signals. Conning 3500 is a client application that, depending on the configuration on board, may be installed on a DPT 3500 Server, a dedicated Conning 3500 client system, or a a multi-purpose workstation. In principle, the application can be installed in two hardware depending versions - a version for a system with track ball or mouse, and a touch screen version providing a pop-up dialog whenever the operator wants to enter settings-Several clients may run in parallel on a number of operating positions. Depending on the configuration, operator accessibility may be limited to avoid conflicts between the operator positions in different rooms.

A Conning 3500 client requires a server application for providing data. A DPT 3500 DP2 class configuration contains two servers in a master/slave set-up and an independent joystick server. The Conning by default shows data from, and provides access to, the Master server; however, provisions are available to temporarily address the Slave server.

This pack of technical files consists of Operating Instruction for Buran DC0020-0850 air dryer, two Specification files and Technical Data Sheet for refrigeration compressed air dryers for volume flows from 20 to 850 cubic metres per hour. Donaldson Ultrafilter - Operating instruction - includes following parts - Important User Information, Installation, Description, Operation, Maintenance, Technical Data, Appendix Legend. The dryers produced by Buran feature the truly unique design which, combined with the well-though control logic, provides the peak level of energy efficiency...

The product information booklet was prepared by the SKF Group professionals. We know that the bearings are considered critically important components of the most engines and it is therefore natural that this machinery piece is always subject of a very extensive research.

This publication is covering such important technical aspects of rolling bearing failures as path patterns and their interpretation, types of possible bearing damage like its wear, smearing, corrosion, indentations, surface distress, damage caused electric current passing through, cracks, cage damage, flaking etc...

Another official set of documents relating to the Autonics products. This collection is dedicated to the solid state relays produced by this company. Namely, the products addressed within this set of technical files, includes single phase separated heatsink type relays of SSR type and SR1 series, single phase slim separated heatsink type relays of same type but SRC1 series, single phase integrated heat sink SRH1 series, single phase analog type SSR and SRPH1 series and, finally, relays that belong to the single phase socket type SSR and SRS1 series. All necessary information is there including instructions on proper usage, characteristics, details, connections etc.

This paper set consists of seven folders containing necessary information relating to the Autonics area sensors of series BW, BWPK, BWC and BWP, auto door sensors - ADS-A and ADS-SE series, encoders - E20S, E20HB, E40, E50S, E50S-C, E58, E60H, E68S, E100H, ENA, ENC, ENH, ENHP, ENP, EP50S, EP58, EPM50, ERB series, fiber optic sensors - BF3R, BF4R, BF5, BFC series, photoelectric sensors - BA2M, BJ, BL, BPS, BMS and BM, BR and BS5, BTF, BTS, BUP, BY, BYD series, pressure sensors - PSA, PSAN, PSB series, and proximity sensors - AS, CR, PET18-5, PRA, PFI, PR, PRCM, PRDWT, PRD, PRDAT, PRDAWT, PRDCM and PRDT, PRW, PS, PSN series.

This set of files contains technical documentation relating to the 50 mm small hybrid recorders and 100 mm hybrid recorders produced by Autonics, namely KRN50 and KRN100 series. As usual, the papers address features, manuals, ordering info, connections, technical specifications, dimensions, input range and type, part descriptions, parameters and functions, factory default settings.

In addition to that, some officially released and distributed software is included in the pack, supplementing the booklets. A needful documentation for the personnel engaged in operating subject equipment.

This set addresses three series of the Autonics-made pressure transmitters and provides ordering info, dimensions and specification, cable information, connection, troubleshooting data, and caution for using of KT-302H series smart pressure transmitters, PTF30 standard pressure controllers and TPS20 pressure transmitters.

Among the main features of these transmitters the user note the HART protocol and standard/high accuracy sensor, high electrical compatibility and 330 degrees rotating display for the environmental conditions, self-stability and filtering device, backlight for easier reading in the dark, high accuracy measurement etc.