 The present pack released by Nippon Electric Industry Company consists of two documents. The first is the Instruction Manual for TDC control equipment (i.e. synchro-unit) which is used to control the KDIST and LUFFING functions of both main and sub-cranes (for HOIST/LUFF functions the equipment carries out a synchronous control).
This part is covering the main principles of operation, identification of each part, installation of the crane and its adjustment, operating procedures, troubleshooting, synchro-transmitter inspection, DC source inspection, relay replacing and card replacing method, test functions. The second part of the pack contains mostly the drawings of the crane. This pack will be most probably helpful for crane operators of Nagasaki cranes as well as professionals carrying out the maintenance and/or repair.
 The operational manual for Synpol controllers released by ABB. These devices are used for the purpose of protection and control of various diesel engines and generators driven by them. This document provides valuable information on the most important functions of the device, technical data, necessary electrical diagrams and terminal boards.
The Synpol device is certified by most of the class societies. The second document is the Appendix containing following data - controller outline, controller case side and rear views, system outline, terminal board generator connection and relays, terminal board diesel and communication control, terminal board additional input/output, terminal board tacho and put-up, resistor, power supply etc.
 This pack of files contains all necessary information on the Syncro ASM Analogue Addressable Marine Fire Control Panel. The User Manual for subject panel covers panel controls and operation, access to menu, routine maintenance. The Syncro ASM panel that complies with all requirements of Euro Standards EN54-2:1997 & EN54-4:1997 and is also fully capable to cover a max of sixteen zones with more than hundred devices for Apollo and Hochiki protocols.
Any number of devices could be allocated to any of the zones with any system configuration being easily accommodated. Each detection device is allocated a message of up to forty characters in order to assist in locating the devices. The panel is offering a remarkably extensive list of options and features for the monitoring and control of plant, sounders and equipment. The range of compatible devices includes optical and ionisation smoke sensors, heat sensors, multi-sensors, switch monitors and relay or bell controllers. Interfaces to the conventional detection systems could also be catered to use the zone-monitoring devices. This pack also includes such must have publication as the Operation Manual, Installation Manual and many more.
 One of the main training objectives declared by compilers of this professional course was to present industry with a completely new training resource providing an overview of the products manufactured by Siemens. The course is forming an integral part of the official STEP series of Siemens; it has originally been intended to cover the basics of electrical products.
And, upon satisfactory completion, you will get the understanding of all similarities/differences between panel boards, switchgear, loan centers and switchboards, be able to clearly explain how exactly the electrical products produced by Siemens could be utilized in different applications, identify those products together with their parts etc.
 This training pack officially published by Siemens company and belonging to their Information and Training - Automation and Drives series, consists of two documents - TIA-Service Training 1/2 - ST-SERV1 and ST-SERV2 courses.
This set of files shall be used as training materials in the course of the preparation to sit for an examination for certification as "Siemens Certified Automation Technician".
Once all three courses - SERV1, SERV2, SERV3 have been completed by the trainees, the optional exam may be taken which, in turn, if passed successfully, will let them obtain the formal three-year certificate.
 Basic Properties and Access Procedure for PROFIBUS; PROFIBUS Profiles DP and FMS; Communication with PROFIBUS-FMS/DP; User Interface; Combimaster Operation; Segment Configuration; Network Segment Range(2-Wire Cable); SIMATIC NET PROFIBUS - Fiber Optic; Properties: Bus configuration, Fiber Optic OLM, Bus Configuration, Double Ring Configuration, FO OLM/S-1300.
Official Siemens release will be helpful for all specialists dealing with the operation/maintenance of this equipment. The document contains all necessary information on PROFIBUS, which specifies the characteristics of the serial field bus system with which the digital field PLCs may be networked.
 ALEA - Power/auxiliary and modular contactors; Miniature power and auxiliary contactors; Thermal overload relays and TOR for miniature power contactors; Motor protection switches up to 10A. Circuit protection - General information. Energy and industrial engineering - Enclosures, MCBS, RCCBS, RCBOS, Control- and signaling devices, accessories, din rail mounting, Surge, lighting arresters, Fuse- and bus bar systems, Terminals and relays, Transformers and power supply units, Measuring instruments etc. Overview PCB relays. Panel relays and accessories. Relay catalogues - TOP technic, TOP competence, TOP availability. Time- and monitoring relays.
 The first paper of the documents set is the instruction manual specific for the S3037 purifier providing readers with the safety precautions, instructions on proper assembly and disassembly, procedures to follow when performing the maintenance inspections and associated periodic inspection chart, list of the commonly occurring troubles and proposed corrective measures.
The second document is the operation manual and it is arranged in three volumes providing the information on configuration and structure, electrical components, functions of all components and start/stop procedures, plus other data.
|